PRODUCTS
Lineup
GN-5W(for double woofer system)
Designed and produced to reproduce natural sounds from heavy low bass to ultra high frequencies with high resolution comparable to Bi-amp systems.
Wide range reproduction of Driver GSU-D04R (500Hz to 24kHz) close to the full range and Woofer GSU-W16R (28Hz to 1kHz) that supports even the deep and low frequency range makes it possible to reduce to two ways (one cross). Was.
Both units (Driver, Woofer) have no peak or dip coloring, so there is no need to equalize on the circuit.
Furthermore, since there is no individual difference between left and right, it is designed and manufactured with a very simple circuit.
Since the circuit is simple, each characteristic of the parts used appears as a “sound”.
Using carefully selected materials (using thick windings for the iron core coil and using very low DC resistance, adopting high sound quality film capacitors with little loss and vibration, all wiring materials are OFC, etc.) So that you don’t give extra adaptation.
The direct connection method and the adoption of large gold-plated SP terminals also support low loss and low leakage.
The LF circuit is compatible with interleaving caused by the earth line in a balanced manner.
By completely separating the LF circuit and the HF circuit, sound turbidity at the crossover section does not occur.
The GSU-W16R and GSU-D04R are integrated to achieve high-quality sound with high resolution.
It is manufactured so that the playback sound does not lose its balance even at low volume. Of course, it doesn’t bother you at high volumes.
Designed and produced to reproduce natural sounds from heavy low bass to ultra high frequencies with high resolution comparable to Bi-amp systems.
Standard type (GN-6S / GN-7S / GN-5W)
Bi-amp drive support
Crossover slope Woofer high cut : 24dB/oct , Driver low cut : 12dB/oct
For Double Woofer system
If the characteristics of Woofer are not the same , the bass range will swell or the sound will be canceled out due canceled out due to the different playback band because there are 2 woofers in one box.
As a result , the loss of resolution is more likely even though the sound may increase in volume.
This is why many people say that a single woofer system is better however GTSound/GSU-W16R has all characteristic values.
Even if Woofer is double , it reproduces the characteristics of a single as it is and then the impedance is 4Ω because of the paraller circuit , and the efficiency is improved from 98dB to 101dB.
This reduces the efficiency difference from the high-efficiency Driver(110dB), so that the resistance between the Woofer and the Driver is very low.
●GN-5W:Crossover Frequncy 500Hz 4Ω
●Weight:12.0kg